Sandstone/Natural Stone Sealer ‘DRY’ Natural Finish

£3.29 £204.96 plus VAT

Sandstone/Natural Stone Sealer ‘DRY’ Natural Finish

Subtotal:

Add-ons total:

Total:

Description

Natural Stone Sealer with a ‘DRY’ Invisible Finish

Effective impregnating sealer for sandstone, limestone, granite and slate

Smartseal Indian Sandstone Sealer and Natural Stone Sealer is a high quality, clear, solvent free acrylic impregnating coating system. Application of the sealer will alter the chemical structure of the porous sandstone or natural stone providing a excellent water repellent and stain resistant surface.

  • One coat application to saturation (for best results apply 2nd coat ‘wet on wet’)
  • 1 x 25 litre will treat 100 – 125 m² on average
  • Resistant to algae, lichen and staining
  • Dry finish
  • Average coverage 4 – 6 m² per litre
  • Application by roller or sprayer
  • Touch dry 2-3 hours
  • Fully waterproof 24 hours
  • Lifespan of up to 5 years can be expected
  • Suitable for Sandstone, Limestone, Terracotta, Travertine, Slate and Granite
  • Can be used externally or internally

Additional information

Weight N/A
Product Size

100ml Sample, 25 Litres, 5 Litres

Preparation

Prior to application of sandstone sealer or natural stone sealer ensure surfaces to be sealed is clean, dry and free from contamination. If algae or stains are present pre treat prior to cleaning with a appropriate cleaning product. **If applied to a surface where a "sweep-in" pointing compound has been used with the last 6 months, the natural stone must be fully cleaned with Smartseal Residue Remover prior to sealant application.**

Application

A suitable pressure sprayer or roller is recommended taking care to avoid any pooling. If over application does occur, excess sealer can be removed with a dry roller or sponge. Ensure this is done within 45 minutes. Application on vertical surfaces should be to full saturation commencing at the bottom and working upwards. One application to saturation is normally sufficient, but for best results, apply 2nd \\'wet on wet\\' coat within 30 minutes. Do not apply in damp conditions and only apply in minimum temperatures of 12- 15°C. Shake container well before use. All equipment should be cleaned with water immediately after use.

Shelf Life

Store away from direct sunlight and sources of heat. Protect from frost. 12 months (in original sealed container).

MSDS

Click To Download MSDS

Step-By-Step Video Guide