Terracotta Classic Colour Enhancer

£18.66 plus VAT

Category:

Contains natural oils and pigments that penetrate the absorbent tile, to enhance and intensify the colour and beauty of the stone. Terracotta Classic Colour Enhancer also helps to prevent staining form water based spills, making cleaning and maintenance considerably easier, preventing premature replacement.

Description

Terracotta Classic Colour Enhancer

Product Description
* Protects against Water Spillages
* Enhances & Intensifies Natural Colour
* Low Odour
* Allows Stone to Breath Naturally
* Easy to Use
* Contains Natural Plant Extracts

Contains natural oils and pigments that penetrate the absorbent tile, to enhance and intensify the colour and beauty of the stone. Terracotta Classic Colour Enhancer also helps to prevent staining form water based spills, making cleaning and maintenance considerably easier, preventing premature replacement.

Not for use on glazed or waxed Terracotta Tiles

Terracotta Classic Colour Enhancer™ can be applied to tiles prior to fixing. Apply a second coat after the floor has been laid.

COVERAGE: Approx. 5-10 sq mtrs per litre on highly absorbent stone and up to 20 sq mtrs on less absorbent stone.

PRODUCT ADVICE: Ensure under floor heating is turned off and cooled prior to application to prevent premature drying. Test product for suitable colour change or enhancement on a spare tile or in an inconspicuous area. Allow each coat to dry before applying additional coats

PLEASE NOTE: For longer-lasting stone protection, we recommend first using Terracotta Impregnator, followed by Terracotta Sealer. If a high gloss finish is required, apply Terracotta Hi-Gloss Liquid Wax.

Allow each coat to dry before applying additional coats

DIRECTIONS FOR USE: Invert container before use – Ensure the area to be treated is clean and free from dust and dirt.

Apply 50-200ml per sq metre using a clean dry cloth, applicator, sponge, brush or roller; apply a thin and even coat over the area to be treated, wait 60-90 minutes, and apply a second coat.

Wait until most of the product has been absorbed, and remove any excess product with Terracotta Classic Colour Enhancer applied by a clean, dry, lint free cloth.

DRYING TIME: May vary from floor to floor; product should be touch dry after 60-90 minutes and dry within 4-6 hours, allow 8-12 hours before standing furniture back on the treated floor.

MAINTENANCE: Maintenance of your flooring should be undertaken at regular intervals. For daily or routine cleaning use Terracotta Cleaner & Maintainer. For higher levels of hygiene, use Anti-Bacterial Cleaner Floor Cleaner.

SAFETY PRECAUTIONS: Use only in a well ventilated areas. Wear appropriate safety gloves, eye protection and respirator when using this product. In confined areas where adequate ventilation is not available, respirators or masks must be worn.