TileMaster Colour Enhancing Sealer – Solvent Based

£10.50 £137.95 plus VAT

TileMaster Colour Enhancing Sealer is perfect to enhancer Natural stone (solvent based)

  • Gives excellent protection against both oil and water based stains
  • Deepens and Enhances the colour of all stones
  • Protects and seals both indoor and outdoor surfaces
  • Easy to apply and Ready to USE


Add-ons total:



What will it Seal

  • Colour Enhancing sealer is ideal to seal, protect and enhance the colour and natural beauty of your natural stone
  • It gives great stain protection on Marble, Limestone, Travertine, Granite and Absorbent Stone.
  • Using The Tile Master” Active Compound Resin” Protection System, your tiles are protected from dirt, grime
  • It also protects against daily food spills with our invisible and breathable sealer.

Warning: Does not protect stone from acid or chemical damage, surface wear or scratching. Does not form layers or films and does not create a shine. Creates a permanent colour change (always pre test a small area)


Where to use

  • Perfect for use on your floors, walls, wet rooms & worktops in your Kitchen, Hall Way, Bathroom, Patios, Swimming Pools or anywhere around your home or garden to protect and enhance natural stone.



  • Enhances the natural colour of the stone and tile
  • Gives excellent protection against both oil and water based stains
  • Protects and seals both indoor and covered outdoor surfaces
  • Easy to apply and Ready to USE
  • Deepens the colour of every surface types
  • Aids maintenance and makes it easy to clean your floor

Additional information

Weight N/A
Product Size

1 Litre, 250ml Sample, 5 Litres

How To Use

Always TEST PRODUCT ON SMALL AREA FIRST. Allow to cure for 24 hrs and check for

desired results, colour change and protection level.

Check that area is dry, clean and free of all residue and previous treatments.

Evenly apply 1 generous coat of all in one sealer to saturate the tile. The tile should hold a wet

or glass like look for about 5 seconds. Apply more sealer if required to achieve this.

After 10 minutes or before the sealer dries on the surface, remove and buff off any excess

sealer using clean and dry white towels or cloths. To remove stubborn residue, simply

reactivate using a clean cloth, slightly wet with all in one sealer .

For highly absorbent stone apply a second coat after 3 hours, using steps 3 and 4 as above.

The floor is fine for light foot traffic in socks and slippers after 4 hours from final coat.

Allow 48 hours before wetting the floor or contact with water or stains


  • Coverage Rates Per 1Litre per coat
  • Medium Absorbency Honed Natural Stone 15 – 20 Sqm
  • Polished Stone 15 – 20sqm

Floor preservation and ongoing Maintenance

  • Surfaces treated with all in one sealer, should be maintained with Tile Master Cleaner No1 or No2
  • depending on surface type, diluted at 1-50.(1 cap in 5 litres of Water)

Product Results

MSDS & Data Sheets

SDS Download Label Download



  • H302: Harmful if swallowed.
  • H319: Causes serious eye irritation.
  • P102: Keep out of reach of children.
  • P233: Keep container tightly closed.
  • P262: Do not get in eyes, on skin, or on clothing.
  • P264: Wash skin thoroughly after handling.
  • P301+330+331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
  • P302+350: IF ON SKIN: Gently wash with plenty of soap and water.
  • P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P333+313: If skin irritation or rash occurs: Get medical advice.


Ingredient Identifier CAS number Identifier CAS number % w/w Classification according to Regulation 1272/2008
Toluene 108-88-3 203-625-9 <20% H290 H315 H319
Naphta 6774-2-48-9 265-150-3 60 – 90% H226 H304 H336
Tetracloroetilene 127-18-4 204-825-9 <0,05% H290 H315 H319