TileMaster Stone Repair Resin Filler with hardener 125ml

£12.99 plus VAT

The stone filler is a mastic made on polyester resins, which is possible to polish in line with the current shine on your tiles.

Total Tin Weight – 250gram (125ml)



Add-ons total:



Tile Master filler is one of the best  ways to repair marble, traverine, and limestone.  Using the cream or white filler to call fill cracks and holes to a high standard.  Also you can mix the filler with the Colour tints to make bespoke colours.    Perfect to get a great colour match on most classic natural stones like travertine or limestone tiles.

The stone filler is a mastic made on polyester resins, which is possible to polish in line with the current shine on your tiles.  It is mainly used for gluing and filling all types of travertine and natural stones.

The Filler can be applied using our simple step by step guide.

Filler is supplied in two parts.

Part A – Filler

Part B – White Hardener

Additional information

Weight N/A
Product Size



White, Cream

How To Use


Always wear gloves, Stone repair resin is harder when set than most stone and is particularly difficult to get off
the skin when set.

  1. Thoroughly clean the hole or crack ensuring you remove any loose debris, dirt or loose and then vacuum to remove any remaining dust.
  2. Tape around the hole or crack using a good quality masking tape. This stops any excess filler going on the tile.
  3. Remove enough Stone Resin (Part A) to fill the hole and place on a piece of old cardboard from the tin.
  4. Next remove some Hardener (Part B) and place next to your Stone Resin (Part A). You want 3% hardener to 100% Stone Resin. We normal say a golf ball size of Resin needs a Pea size of Filler. Mix these both together to start the reaction. You now have about 15mins before the mix becomes unworkable.
  5. Fill the hole or crack using the Stanley blade, and then scrape off any excess so that the filled area is level with the masking tape. (Note very deep areas may require a two stage application).
  6. Leave the filler for a few minutes to harden. Once this happen remove the masking tape and scrape off the excess using the clean fresh Stanley blade to make the fill flush to the stone.
  7. Once the filler is completely hard after 1 hour, the floor is fine to walk on and can be used as normal.

Product Results


MSDS & Data Sheets

SDS Download


pH  NA


  • H302: Harmful if swallowed.
  • H319: Causes serious eye irritation.
  • P102: Keep out of reach of children.
  • P233: Keep container tightly closed.
  • P262: Do not get in eyes, on skin, or on clothing.
  • P264: Wash skin thoroughly after handling.
  • P301+330+331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
  • P302+350: IF ON SKIN: Gently wash with plenty of soap and water.
  • P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P333+313: If skin irritation or rash occurs: Get medical advice.


SUBSTANCE   Codes of class and hazard category Codes of hazard Quantity
CAS: 100-42-5EINECS: 2002-851-5

n. Index: 601-026-00-0

n. REACH registration: 01-2119457861-32-XXXX


Flam. Liq. 3Asp. Tox. 1

Acute tox. 4



Eye irrit 2

Skin irrit 2

H226 – H361d – H332 – H372 (auditory organ) – H315 – H319 10-20%