Limestone & Sandstone Sealer 1 Ltr

£17.16 plus VAT

Limestone & Sandstone Sealer contains a unique blend of Acrylic Resins and Co-polymers which bonds to the stone and applies a protective, hard wearing, extremely durable, natural finish that enhances colours within the stone. Also provides excellent results on worn, dull or rough textured tiles, brick sets, clay and quarry tiles.

Description

Limestone & Sandstone Sealer. Product Description: * Enhances Natural Colour * Extremely Durable & Hard Wearing * Makes Daily Cleaning Easier * Solvent Free * Contains Natural Plant Extracts * Fully Biodegradable Surfactants * New Advanced Resin-Technology™ Limestone & Sandstone Sealer contains a unique blend of Acrylic Resins and Co-polymers which bonds to the stone and applies a protective, hard wearing, extremely durable, natural finish that enhances colours within the stone. Also provides excellent results on worn, dull or rough textured tiles, brick sets, clay and quarry tiles. Using the latest Advanced Resin-Technology™ it allows the stone to breathe naturally and assists in keeping the surface, free from daily dirt and grease build up, making cleaning and maintenance considerable easier. COVERAGE: Approx. 10 sq mtrs per litre on rough or highly absorbent stone; up to 25 sq mtrs on less absorbent stone or stone. PRODUCT ADVICE: Ensure under floor heating is turned off and allow floor to cool prior to application. Test product for any colour change in an inconspicuous area before use. DIRECTION FOR USE: Invert container before use – Ensure the area to be sealed is free from dirt, dust or grime. Apply using natural pad applicator, sponge or mop or roller. Apply an even coat of 40-100ml per sq metre; 10-25 square metres per litre, allow to dry before applying a second or third coat (approx 30 minutes), apply each coat in opposite directions. Wipe off any spills. Do not rush the application or air bubbles may appear, ensure to pass applicator slowly back over covered area to remove air bubbles. For a high gloss finish apply a minimum of 3 coats of Natural Stone Gloss. DRYING TIME: May vary from floor to floor; product should be touch dry after 1 hour, and fully dry within 12 hours, allow 6-12 hours before standing furniture back on the treated floor. MAINTENANCE: Maintenance of your floors should be undertaken at regular intervals. To maintain the surface sealer and finish, periodically apply 1-2 coats Limestone & Sandstone Sealer. For daily or routine cleaning use Professional Care & Maintainer. For higher levels of hygiene use Anti Bacterial Floor Cleaner. TECHNICAL ADVICE: Not For Outside Use. SAFETY PRECAUTIONS: Protective gloves should be worn when using this product, especially if skin is sensitive. Avoid contact with eyes; Ensure all spills, and non treated areas are thoroughly rinsed with clean fresh water.