Natural Stone Sealer. Product Description: * Enhances Natural Colour * xtremely Durable & Hard Wearing * Makes Daily Cleaning Easier * Solvent Free * Contains Natural Plant Extracts * Fully Biodegradable Surfactants * New Advanced Resin-Technology™ This highly advanced Natural Stone Sealer for use on most Natural Stone, bonds to the stone and applies a protective, hard wearing and extremely durable natural finish that enhances natural colours. Natural Stone Sealer contains a unique blend of Acrylic Resin and Co-polymers. Using the latest Advanced Resin-Technology™ the sealer develops a solid bond to the stone. At the same, applies a protective, hard wearing and extremely durable natural sheen finish which enhances worn, dull or rough textured tiles. Can be used on; Terrazzo, Travertine, Sandstone, Limestone and Brick sets, Quarry tiles, un-polished Marble and Granite. Natural Stone Sealer allows the stone to breathe naturally and assists in keeping the surface, free from dirt and grease build up, making cleaning and maintenance considerable easier. For high gloss finish, apply Natural Stone Gloss. COVERAGE: Approx. 10 sq mtrs per litre on rough or highly absorbent stone; up to 25 sq mtrs on less absorbent stone. PRODUCT ADVICE: Not For Outside Use. Ensure under floor heating is turned off and cooled prior to application to prevent premature drying. Test product for suitable colour change or enhancement on a spare tile or in an inconspicuous area. DIRECTION FOR USE: Invert container before use – The surface to be treated must be clean, free from any residues, dust and dirt. If required, use Wax & Residue Remover prior to application. Dependant on stone type; apply an even coat of 40-100ml per sq metre, using natural pad applicator, sponge, mop or roller. Allow to dry before applying a second or third coat. Ensure to apply in opposite directions. Wipe off any spills. Do not rush the application. If air bubbles appear, remove by passing your applicator slowly over the areas affected. For a high gloss finish apply a minimum of 3-4 coats of Natural Stone Gloss. DRYING TIME: May vary from floor to floor; product should be touch dry within 30 to 60 minutes in-between coats, and fully cured within 6-12 hours. Allow 6-12 hours before standing furniture back on the treated floor. MAINTENANCE: To ensure the durability and “new look” of your floor, maintain on a daily basis using Professional Care & Maintainer. SAFETY PRECAUTIONS: Protective gloves should be worn when using this product. Avoid contact with eyes; Ensure all spills, and non treated areas are thoroughly rinsed with clean fresh water. Use in well ventilated areas.