All in One – Water Based Sealer

£33.17 £127.33 plus VAT

TileMaster AllinOne Sealer is perfect  for Natural stone, ceramic and porcelain tiles

  • Gives excellent protection against both oil and water based stains
  • Laboratory certified as Safe for food preparation areas and worktops
  • Protects and seals both indoor and outdoor surfaces
  • Easy to apply and Ready to USE


Add-ons total:



What will it Seal

  • All in one sealer is ideal to seal and protect all your natural stone and man-made tiles
  • It gives great stain protection on Marble, Limestone, Travertine, Granite and Highly Absorbent Stone and Ceramic \ Porcelain.
  • Using The Tile Master” Active Compound Resin” Protection System, your tiles are protected from dirt, grime
  • It also protects against daily food spills with our invisible and breathable sealer.

Warning: Does not protect stone from acid or chemical damage, surface wear or scratching. Does not form layers or films and does not create a shine (always pre test a small area)


Where to use

  • Perfect for use on your floors, walls, wet rooms & worktops in your Kitchen, Hall Way, Bathroom, Patios, Swimming Pools or anywhere around your home or garden to protect honed natural stone.



  • Gives excellent protection against both oil and water based stains
  • Protects and seals both indoor and outdoor surfaces
  • Easy to apply and Ready to USE
  • Does not change the appearance of most surface types
  • Aids maintenance and makes it easy to clean your floor

Additional information

Weight N/A
Product Size

1 Litre, 5 Litres

How To Use

  • Always TEST PRODUCT ON SMALL AREA FIRST. Allow to cure for 24 hrs and check for
  • desired results, colour change and protection level.
  • Check that area is dry, clean and free of all residue and previous treatments.
  • Evenly apply 1 generous coat of all in one sealer to saturate the tile. The tile should hold a wet
  • or glass like look for about 5 seconds. Apply more sealer if required to achieve this.
  • After 10 minutes or before the sealer dries on the surface, remove and buff off any excess
  • sealer using clean and dry white towels or cloths. To remove stubborn residue, simply
  • reactivate using a clean cloth, slightly wet with all in one sealer .
  • For highly absorbent stone apply a second coat after 3 hours, using steps 3 and 4 as above.
  • The floor is fine for light foot traffic in socks and slippers after 4 hours from final coat.
  • Allow 48 hours before wetting the floor or contact with water or stains


  • Coverage Rates Per 1Litre per coat
  • High Absorbency Honed Natural Stone 10 – 15 sqm
  • Medium Absorbency Honed Natural Stone 15 – 20 Sqm
  • Polished Stone 15 – 20sqm
  • Ceramic and Porcelain 35 – 45sqm

Floor preservation and ongoing Maintenance

Surfaces treated with all in one sealer, should be maintained with Tile Master Cleaner No1 or No2

depending on surface type, diluted at 1-50.(1 cap in 5 litres of Water)

Product Results

MSDS & Data Sheets

[su_button url=”” target=”blank” size=”6″ icon=”icon: chevron-right”]MSDS Download[/su_button] [su_button url=”” target=”blank” size=”6″ icon=”icon: chevron-right”]Label Download[/su_button]

pH  Between 6 and 8


  • H302: Harmful if swallowed.
  • H319: Causes serious eye irritation.
  • P102: Keep out of reach of children.
  • P233: Keep container tightly closed.
  • P262: Do not get in eyes, on skin, or on clothing.
  • P264: Wash skin thoroughly after handling.
  • P301+330+331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
  • P302+350: IF ON SKIN: Gently wash with plenty of soap and water.
  • P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P333+313: If skin irritation or rash occurs: Get medical advice.


No dangerous component according to Regulations. (CE) no. 1907/2006 and (CE) No.453/2010