Specialist York & Flagstone Sealer. Product Description: * Enhances Natural Colour * Extremely Durable & Hard Wearing * Makes Daily Cleaning Easier * Solvent Free * Contains Natural Plant Extracts * Fully Biodegradable Surfactants * New Advanced Resin-Technology™ This Specialist York & Flagstone Sealer, bonds to the stone and applies a protective, hard wearing and extremely durable natural finish that enhances the stones natural colours. Also provides a protective coating. Specialist York & Flagstone Sealer contains a unique blend of Acrylic Resins and Co-polymers. Using the latest Advanced Resin-Technology™ it bonds to the stone and applies a protective, hard wearing and extremely durable, natural sheen finish that enhances worn, dull or rough textured tiles. Can also be used on, brick sets, clay and quarry tiles. Specialist York & Flagstone Sealer allows the stone to breathe naturally and assists in keeping the surface, free from dirt and grease build up, making cleaning and maintenance considerable easier. If a high gloss finish is required apply Natural Stone Gloss. COVERAGE: Approx. 10 sq mtrs per litre on rough or highly absorbent stone; up to 25 sq mtrs on less absorbent stone. PRODUCT ADVICE: Ensure under floor heating is turned off and allow floor to cool prior to application. Test product for any colour change in an inconspicuous area before use. DIRECTION FOR USE: Invert container before use – Use only in a well ventilated area. The surface to be treated must be clean, free from any residues, dust and dirt. If required, use Wax & Residue Remover prior to application. Apply an even coat of 40-100ml per sq metre; 10-25 square metres per litre using natural pad applicator, sponge, mop or roller. Allow to dry before applying a second or third coat. Ensure to apply in opposite directions. Wipe off any spills. Do not rush the application as air bubbles appear, remove by passing your applicator slowly over the areas affected. For a high gloss finish apply a minimum of 3-4 coats of Natural Stone Gloss. DRYING TIME: May vary from floor to floor; product should be touch dry within 30 to 60 minutes in-between coats, and fully cured within 6-12 hours. Allow 6-12 hours before standing furniture back on the treated floor. MAINTENANCE: To ensure the durability and “new look” of your floor, maintain on a daily basis using Professional Care & Maintainer. Gloss finish maybe topped up by applying extra coats at regular intervals. SAFETY PRECAUTIONS: Protective gloves should be worn when using this product. Avoid contact with eyes; Ensure all spills, and non treated areas are thoroughly rinsed with clean fresh water.